You have no items in your shopping cart.
Servo Motor STA6 B3.41 / 6 3N32L
Berger Lahr STA6 B3 41/6 3N32L Servo Motor
• STA: Actuator with Cams and Relay
• Running Time for 90° : 6 Seconds
• Body Size : B3
• Motor Type Inside : RSM 41/6
• Operation Program / Wiring : 3 Function Cams
• Sense of Rotation : Left
- STA Actuator Features
- The cams can be continuously adjusted by hand, fine tuning with a screw-driver. This makes on-site adjustment easier.
- Short start/stop times allow precise switching times and ensure good dynamic performance.
- Precise movements are made possible by speeds which are not affected by changes in voltage or load.
- As the actuator displays high holding torque when de-energized, no additional brake elements are required.
- Through its compact construction, the actuator takes up little room.
- Actuators can be installed in any plane.
- Connection to the mains is made via screw terminals for the B1, B2 and B3 and by plug for the B0. This does away with the need for any adaptors.
- The optional version with a potentiometer allows a feedback signal on the angle of rotation to be evaluated.
- The actuators are lubricated for life, and no on-site maintenance is required.
General Data for STA Servo Motors
Values | |
---|---|
Power Supply | 230 V AC / 50Hz |
Switching power of auxiliary switches | 10(2) A 250V (to CEE 24 / VDE 0630) |
Protection Grade | DIN 40050, IP 40 STA, STM ...Q3 are available with IP54 |
Permitted Ambient Temperature | Operation: 0 ... 60°C Transport and Storage: -20 ... +60°C |
Berger Lahr STA6 B3 41/6 3N32L Servo Motor
• STA: Actuator with Cams and Relay
• Running Time for 90° : 6 Seconds
• Body Size : B3
• Motor Type Inside : RSM 41/6
• Operation Program / Wiring : 3 Function Cams
• Sense of Rotation : Left
- STA Actuator Features
- The cams can be continuously adjusted by hand, fine tuning with a screw-driver. This makes on-site adjustment easier.
- Short start/stop times allow precise switching times and ensure good dynamic performance.
- Precise movements are made possible by speeds which are not affected by changes in voltage or load.
- As the actuator displays high holding torque when de-energized, no additional brake elements are required.
- Through its compact construction, the actuator takes up little room.
- Actuators can be installed in any plane.
- Connection to the mains is made via screw terminals for the B1, B2 and B3 and by plug for the B0. This does away with the need for any adaptors.
- The optional version with a potentiometer allows a feedback signal on the angle of rotation to be evaluated.
- The actuators are lubricated for life, and no on-site maintenance is required.
General Data for STA Servo Motors
Values | |
---|---|
Power Supply | 230 V AC / 50Hz |
Switching power of auxiliary switches | 10(2) A 250V (to CEE 24 / VDE 0630) |
Protection Grade | DIN 40050, IP 40 STA, STM ...Q3 are available with IP54 |
Permitted Ambient Temperature | Operation: 0 ... 60°C Transport and Storage: -20 ... +60°C |
Datasheets |
---|