01489 570737

Mould Remediation Equipment

When you need a way to clean and carry out mould removal in your workspace we're able to supply the Goodway product to suit your needs.

Moulds and Fungi are everywhere. When you need a way to clean your workspace we supply Goodway Moldtek, Moldtek-XC & Moldtek-MT and the MP-50 MoldPro Sprayer. Able to protect you from over 1,000 strains that have been found including Aspergillus, Penicillium, and Stachybotrys, often labeled "toxic mould". They produce microscopic spores that travel through the air all around us. When spores find the right conditions they reproduce quickly (often within 24-48 hours) to create more colonies of mould. Mould can grow on almost any surface and require a little bit of damp and a food source like dust, paper, ceiling tiles, cardboard, and wood to flourish.

Mould can cause a variety of harm, not only to the property but also to the health of inhabitants within a commercial or residential environment. To clean mould and keep it from coming back is of vital importance to your health. Goodway offers a variety of cleaners and mould remediation agents for your walls and surfaces, AC systems and ducts.

MOULD FACT
Many moulds are capable of producing compounds which are toxic to other organisms, including people. More than 200 mycotoxins have been identified from common mould. One of these, Aflatoxin B1 is one of the most potent carcinogens known. It has been positively linked to liver cancer and is a suspected cause of lung cancer.

 

MP-50 MoldPro Sprayer

MP-50 in Use

The Goodway MP-50 MoldPro Sprayer provides an easy, convenient method for applying MoldTek chemicals. The unit features a 12 V DC rechargeable battery and large 19 litre spray tank for remote operations.

  • MP-50 Specifications
  • Input Power: 7 Amps, 12 V, DC Rechargeable Battery
  • Recharge Power : 0.1 Amps, 115 V,60Hz AC
  • Optional : 0.05 Amps, 230 V, 50 Hz
  • Chemical Tank : 19 Litres
  • Output Water Pressure : 6.6 Bar
  • Output Water Flow : 1.9 LPM
  • Pump : Intermittent Duty Cycle
  • Dimensions : 660mm High x 480mm Wide x 200mm Deep
  • Weight : 12 kg
MP-50

Please Contact Us Regarding Purchasing the MoldPro Sprayer


Moldtek, Moldtek-XC, & Moldtek-MT

Mould and mildew are not only unsightly and unpleasant to smell. They are also a serious health concern for you, your staff and your tenants. Remove and prevent mould and mildew with these proven and effective Goodway MoldTek formulations. MoldTek is fast – it’s pre-mixed and ready to use. MoldTek-XC is a concentrate – perfect for big jobs or where storage is at a premium. MoldTek-MT inhibits future mould growth. Just one application extends the effectiveness of your cleaning and helps prevent mould’s return.


MoldTek Mould & Mildew Remover

MoldTek Mould & Mildew Remover

MoldTek combines the germ killing ability of a disinfectant with a cleaning agent to remove harmful Mould and mildew. It disinfects, cleans and deodorizes hard, non-porous, inanimate environmental surfaces, such as walls and floors, where microbial contamination may accumulate. It is mild, without any damaging side effects to equipment and surfaces. It’s light citrus scent dissipates rapidly making it a pleasure to use. It will not stain or blemish most fabrics

MOLDTEK-01
MoldTek ready-to-use Mould and mildew remover, 3,8 litre bottle

MOLDTEK-4X1
MoldTek ready-to-use Mould and mildew remover, case of four 3,8 litre bottles

MOLDTEK-32OZ
MoldTek ready-to-use Mould and mildew remover, 946 ml spray bottle

MOLDTEK-32OZ-CS
MoldTek ready-to-use Mould and mildew remover, case of twelve 946 ml spray bottles

NOTE : 19 LITRE BOTTLES AND 208
LITRE DRUMS AVAILABLE

MoldTek-XC Mould & Mildew Remover

MoldTek-XC Mould & Mildew Remover

MoldTek-XC is a concentrated one step disinfectant that is effective against a broad spectrum of bacteria and kills Mould and mildew on contact. This is a no rinse solution that disinfects, cleans and deodorizes in one labor saving step. It’s concentrated formula delivers superior performance at a lower end-use cost. 1 gallon of concentrate will produce 64 gallons of finished product. Moisture from floods, broken pipes, or even uncontrolled humidity can result in Mould contaminated indoor spaces. MoldTek-XC can be used to disinfect surfaces encountered in every phase of Mould remediation. The concentrated formula means you pay only for the powerful cleaning agents, not the water required for the final solution. The finished product can be wiped, mopped or sprayed onto the surface to be cleaned.

MOLDTEK-XC-01
MoldTek-XC concentrate Mould and mildew remover, 3,8 litre bottle

MOLDTEK-XC-4X1
MoldTek-XC concentrate Mould and mildew remover, case of four 3.8 litre bottles

MoldTek-MT Mould & Mildew Inhibiter

MoldTek-MT Mould & Mildew Inhibiter

MoldTek-MT is an antimicrobial treatment that controls and inhibits the growth of microorganisms, such bacteria, and fungi and Mould, on floors and walls. Damp musty odors caused by microbial contamination from excessive moisture, high levels of humidity, and flood and water damage is a serious problem in many living and working environments. Unsightly black Mould streaks on walls and floors are all too often en-countered in all types of buildings today. Microorganisms are everywhere causing odors, damaging surfaces and secreting toxic byproducts to living and working areas. MoldTek-MT is specially formulated not only to control the growth of microorganisms on floors and walls, but its residual effect inhibits the re-growth of microbes for months.

MOLDTEK-MT-01
MoldTek-MT ready-to-use Mould and mildew inhibiter, 3,8 litre bottle

MOLDTEK-MT-5
MoldTek-MT ready-to-use Mould and mildew inhibiter, 19 litre bottle

MOLDTEK-MT-4X1
MoldTek-MT ready-to-use Mould and mildew inhibiter, case of four 3,8 litre bottles

Sort by

Follow us

Our Brands