You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
Molyslip Copper Anti-Seize Grease 100g Tube
Technical Data
| Property | Result |
|---|---|
| Consistency | NLGI 2 |
| Base oil viscosity | 100 cSt |
| Drop point | >300°C (non-melting) |
| Flashpoint (IP34) | >200°C |
| Effective temperature range | -40°C up to +1100°C |
| Solidification point (of the base fluid) | -20°C |
| Coefficient of friction (steel on steel, steady-state) | 0.12 |
When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener.
Correct torque settings can be calculated using the tables and charts below and the standard thread equation:
T = KDP
T = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factor
| Material | K Nut factor |
|---|---|
| 8.8 Steel self-coloured | 0.14 |
| 8.8 Steel BZP | 0.10 |
| 8.8 Steel hot-dip galvanised | 0.14 |
| A2 Stainless steel | 0.13 |
| Brass | 0.12 |
| Datasheets | |
|---|---|
 | Technical Data.pdf |
