DTK Boiler Water Test Kit

A comprehensive all-in-one boiler water testing kit designed for mobile treatment engineers and water treatment professionals.

• Parameters tested:

• Conductivity / TDS (0–19,999 µS)
• pH (0.00–14.00)
• Temperature
• Alkalinity P (0–2,400 ppm)
• Alkalinity M (0–2,400 ppm)
• Alkalinity OH (0–2,400 ppm)
• Total Hardness LR (0–50 ppm)
• Hardness Stop/Go (0–4 ppm)
• Chloride (0–3,000 ppm)
• Sulphite (0–150 ppm)
• Phosphate (0–80 ppm)

Combining electronic meters with drop test and comparator reagents, the DTK Boiler Water Test Kit delivers accuracy and speed across eleven key water treatment parameters. All components are secured in a robust carry case with a chemical-resistant foam insert, making it compact and portable for use on site. Each kit contains sufficient reagents to carry out between 100 and 200 tests.

Regular boiler water testing is essential to prevent system corrosion, scale formation, pipe blockages and increased biological activity — all of which can result in costly system failures if left unmonitored.

What's in the kit?

• Instruments

• Extech Conductivity / TDS / Temperature Meter x 1
• Extech pH / Temperature Meter x 1
• Checkit Comparator (Standard) x 1
• Phosphate HR Disk x 1

• Accessories

• Waterproof test instructions x 1
• 65ml plastic test bottle x 1
• 20ml plastic standard syringe x 1
• 10ml plastic standard syringe x 1
• Square 10ml plastic comparator test tubes: 5 pack
• Weighted base & solution cups (x5) x 1
• 25mm filter holder x 1
• Filter papers GF/C: 50 pack

• Reagents for 100–200 tests

• PA1 — Alkalinity P Indicator: 1 x 65ml
• PA2/TA2 — Alkalinity HR Titrant: 1 x 65ml
• TA3 — Alkalinity LR Titrant: 1 x 65ml
• TA4 — Alkalinity M Indicator: 1 x 65ml
• PA3 — OH Alkalinity: 1 x 65ml
• TH2 — Total Hardness Buffer: 1 x 65ml
• TH5 — Total Hardness Indicator: 1 x 65ml
• TH3 — Total Hardness LR Titrant: 1 x 65ml
• Stop/Go Hardness Solution: 1 x 65ml
• BC1/CC1 — Chlorine Indicator: 1 x 65ml
• BC2 — Chlorine HR Titrant: 1 x 65ml
• CC2 — Chloride LR Titrant: 1 x 65ml
• S1 — Sulphite Indicator Powder: 1 x 40g
• S2 — Sulphite Titrant: 1 x 65ml
• PB1 — Phosphate: 1 x 65ml
• PB2 — Phosphate: 1 x 65ml
• Conductivity Standard 1413 µS: 1 x 65ml
• pH 4 Buffer Solution: 1 x 65ml
• pH 7 Buffer Solution: 1 x 65ml
• pH 10 Buffer Solution: 1 x 65ml

For full reagent and instrument specifications please see the Details tab above.