CombiMag Twin Power | Twin Magnetic Power Flushing Filters

Excl. VAT:	£619.81
Incl. VAT:	£743.77
Brand:	Kamco
Product Code:	KAM-TWIN
Quantity:

Description
Datasheets

Two filters in a single compact unit.
Maximum protection in either flow direction.

2x 11,000 gauss of magnetic power spread over 400 sq.cm surface area.
22,000 gauss of magnetic power.
Increases power flushing efficiency; Reduces time taken to power flush a system.
Prevents re-circulation of debris through the boiler.
Transparent cylinder gives visible indication of system contamination and the need to clean magnet.
Built-in by-pass enables magnets to be cleaned without interrupting power flush process.
Supplied in protective case, with coupling hose.

POWER FLUSHING

The fastest and most effective means to remove sludge and corrosion debris from central heating systems is to use a high flow of water to loosen and ultimately expel debris. Power flushing mobilises large quantities of black iron oxide within the system. Clear water is forced through the system, pushing debris ahead of it. This continues until the dump water finally runs clear, and can take a considerable length of time.

CombiMag TWIN POWER MAGNETIC FILTER MODULE

This filter uses two powerful 11,000 gauss rare earth magnets to quickly capture circulating black iron oxide contamination from the flushing water.

BENEFITS

The time saved on every job when using the CombiMag TWIN POWER will rapidly cover its cost and reduce disruption for householders.
The debris retained on the magnet is an impressive visual aid to demonstrate to householders what has been removed from their heating system and emphasises the benefits of a more efficient heating system and resulting reduction in energy usage.

WHAT IS INCLUDED

CombiMag Twin Power unit.
2 x 1.5 m hoses with 1” female brass connectors each end.
Carry case

INSTALLATION

The CombiMag TWIN POWER filter is installed in line with any power flushing pump. The cyclone construction directs contaminated water through a powerful magnetic field, such that even the smallest of particles are retained on the central magnet, from which they may be easily cleaned during and after power flushing. Captured debris is prevented from re-entering the heating system, preventing saturation of the cleaning solution with black sludge, leading to a more effective power flush.