System Safe DM Corrosion Inhibitor concentrate 500ml

• Suitable for multi-metal systems, with iron, steel, copper, brass and aluminium.
• Prevents scale, sludge and magnetite formation.
• Prevents micro-biological contamination.
• Prevents internal pitting and galvanic corrosion.
• Protects and extends life of heating system.
• 0.5% dosage rate (0.5 lt per 100lt water)
• Buildcert NSF/DWTA approval.
• Benchmark compliance.

Scale & Corrosion Inhibitor for all Systems

Once a heating system has been power flushed to remove sludge and corrosion deposits, it is important to protect it from further deterioration.

This can be achieved by treating the system water with Systemsafe-DM, a balanced blend of corrosion and scale inhibitors, formulated to provide complete protection against system corrosion and scale formation.

It gives long term protection to central heating systems, preventing internal corrosion, scale deposition and boiler noises, and extends the life of the system and maintains its operational efficiency.

The formation of black iron oxide sludge, which accumulates in low flow areas to give flow problems and cold spots on radiators, is prevented, as is the electrolytic and oxidic corrosion which leads to localised pin-hole corrosion and leaks.

Systemsafe-DM may be used with all metals commonly used in heating systems, including iron, steel, brass, copper and aluminium. It is simply added to the heating system and requires no further action.

Systemsafe-DM has passed the Buildcert/DWTA performance test and approval process, so you can be sure that it will give long term scale and corrosion protection to heating systems.