You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
SQM50.483A1Z3 110v Servo Motor
Siemens SQM50.483A1Z3 Servo Motor
110v
The SQM50.483A1Z3 actuators are used to drive gas or air dampers of oil and gas burners of medium to large capacity.
They are used primarily for load-dependent control of the amounts of gas, oil and combustion air:
• In connection with 3-position or modulating controllers (e.g. 4...20 mA), or
• Directly by burner controls
- Features
- Reversible electromotoric actuators delivering torques up to 40 Nm
- Running times from 10 to 90 seconds
- With 1 or 2 drive shaft ends; drive shafts are available as separate items and can be exchanged
- Can be equipped with electronic modules for control and position indication
- Internal and external position indication
- Drive shaft and cam shaft can be separately disengaged
Technical Data
| Torque and holding torque 3) | Running time at 50 Hz for angular rotation 1) | Auxiliary switches incl. 2 end switches | Type of shaft | Electronic module (integrated ex works) 5) | Potentiometer (integrated ex works) | |
|---|---|---|---|---|---|---|
| Max. Nm 2) | 90° | 130° | Piece | AGA… | AGA… | ASZ… |
| 15 | 30 s | - | 8 | 58.3 | 56.9A17 | 12.30 |
Siemens SQM50.483A1Z3 Servo Motor
110v
The SQM50.483A1Z3 actuators are used to drive gas or air dampers of oil and gas burners of medium to large capacity.
They are used primarily for load-dependent control of the amounts of gas, oil and combustion air:
• In connection with 3-position or modulating controllers (e.g. 4...20 mA), or
• Directly by burner controls
- Features
- Reversible electromotoric actuators delivering torques up to 40 Nm
- Running times from 10 to 90 seconds
- With 1 or 2 drive shaft ends; drive shafts are available as separate items and can be exchanged
- Can be equipped with electronic modules for control and position indication
- Internal and external position indication
- Drive shaft and cam shaft can be separately disengaged
Technical Data
| Torque and holding torque 3) | Running time at 50 Hz for angular rotation 1) | Auxiliary switches incl. 2 end switches | Type of shaft | Electronic module (integrated ex works) 5) | Potentiometer (integrated ex works) | |
|---|---|---|---|---|---|---|
| Max. Nm 2) | 90° | 130° | Piece | AGA… | AGA… | ASZ… |
| 15 | 30 s | - | 8 | 58.3 | 56.9A17 | 12.30 |
| Datasheets |
|---|
