01489 570737

Servo Motor STM30 B2.37 / 6 22N

Excl. VAT: £639.69
Incl. VAT: £767.63
Product Code: BERG-STM30-24V
Quantity:

Berger Lahr Damper Servo Motor STM30 B2.37/6 22N
• STM: Actuator with Cams
• Running Time for 90° : 30 Seconds
• Body Size : B2
• Motor Type Inside : RSM 37/6
• Operation Program / Wiring : 2 Function Cams, 2 Counter Number

  • STM Actuator Features
  • The cams can be continuously adjusted by hand, fine tuning with a screw-driver. This makes on-site adjustment easier.
  • Short start/stop times allow precise switching times and ensure good dynamic performance.
  • Precise movements are made possible by speeds which are not affected by changes in voltage or load.
  • As the actuator displays high holding torque when de-energized, no additional brake elements are required.
  • Through its compact construction, the actuator takes up little room.
  • Actuators can be installed in any plane.
  • Connection to the mains is made via screw terminals for the B1, B2 and B3 and by plug for the B0. This does away with the need for any adaptors.
  • The optional version with a potentiometer allows a feedback signal on the angle of rotation to be evaluated.
  • The actuators are lubricated for life, and no on-site maintenance is required.

General Data for STM Servo Motors

  Values
Power Supply 230 V AC / 50Hz
Switching power of auxiliary switches 10(2) A
250V (to CEE 24 / VDE 0630)
Protection Grade DIN 40050, IP 40
STA, STM ...Q3 are available with IP54
Permitted Ambient Temperature Operation: 0 ... 60°C
Transport and Storage: -20 ... +60°C

Berger Lahr Damper Servo Motor STM30 B2.37/6 22N
• STM: Actuator with Cams
• Running Time for 90° : 30 Seconds
• Body Size : B2
• Motor Type Inside : RSM 37/6
• Operation Program / Wiring : 2 Function Cams, 2 Counter Number

  • STM Actuator Features
  • The cams can be continuously adjusted by hand, fine tuning with a screw-driver. This makes on-site adjustment easier.
  • Short start/stop times allow precise switching times and ensure good dynamic performance.
  • Precise movements are made possible by speeds which are not affected by changes in voltage or load.
  • As the actuator displays high holding torque when de-energized, no additional brake elements are required.
  • Through its compact construction, the actuator takes up little room.
  • Actuators can be installed in any plane.
  • Connection to the mains is made via screw terminals for the B1, B2 and B3 and by plug for the B0. This does away with the need for any adaptors.
  • The optional version with a potentiometer allows a feedback signal on the angle of rotation to be evaluated.
  • The actuators are lubricated for life, and no on-site maintenance is required.

General Data for STM Servo Motors

  Values
Power Supply 230 V AC / 50Hz
Switching power of auxiliary switches 10(2) A
250V (to CEE 24 / VDE 0630)
Protection Grade DIN 40050, IP 40
STA, STM ...Q3 are available with IP54
Permitted Ambient Temperature Operation: 0 ... 60°C
Transport and Storage: -20 ... +60°C

Datasheets

Follow us

Our Brands