You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
Rust Shield/Protection Aerosol 400ml
HOW TO USE
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
APPLY DIRECTLY TO A COOL SURFACE
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
REPEAT THE PROCESS
Repeat the process 2-3 times for maximum protection, allowing 15 minutes drying time between each coat. Leave to dry for 24 hours before using.
STORAGE & REUSE
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.
Rust Shield/Protection Aerosol 400ml
- Features
- Ultimate protection against rust and corrosion
- Leaves an impermeable, weatherproof barrier
- Prevents the reappearance of rust – ideal for interior & exterior use
- Clear, flexible glossy finish, highly resistant to cracking & crazing
- Perfect after-treatment for our rust remover range
Rust Shield Aerosol leaves a clear flexible glossy finish, with fantastic resistance to rust and corrosion. It provides the perfect after-treatment for the rust remover range and can also be used as an effective pre-treatment. Highly resistant to cracking it forms an impermeable, weather proof, barrier that helps to prevent the reappearance of rust. It is also rated to resists temperatures of up to 180°C.
Suitable for use on all metals.
Please Note : Not suitable for painting over
| Datasheets |
|---|
