Riello R40 Pump
Riello R40 Pump
The Riello R40 Pump is suitable for use with gas, oil, kerosene and 20% blend of biofuel; and has been designed to allow working with one pipe or two pipe oil feed systems.
Safety is based on a innovative system with oil cut-off valve normally open. So during pre-ventilation phase there’s no pressure in the hydraulic circuit. This improves safety and avoids the continuous ignition sparking during pre-ventilation thereby reducing electromagnetic interferences.
Specifications
Rotation Speed | 2800 - 3600 min -1 |
---|---|
Viscosity Range | 1.6 - 6mm 2/s (cST) |
Pressure Range | 7 - 12 bar |
Temperature Range | -10 to + 70°C |
Coil Voltage | 53v (+0.5-2) 50/60 Hz |
This Pump Replaces Riello Pumps with Part No. 3007811 & 3020475
Riello R40 Pump
The Riello R40 Pump is suitable for use with gas, oil, kerosene and 20% blend of biofuel; and has been designed to allow working with one pipe or two pipe oil feed systems.
Safety is based on a innovative system with oil cut-off valve normally open. So during pre-ventilation phase there’s no pressure in the hydraulic circuit. This improves safety and avoids the continuous ignition sparking during pre-ventilation thereby reducing electromagnetic interferences.
Specifications
Rotation Speed | 2800 - 3600 min -1 |
---|---|
Viscosity Range | 1.6 - 6mm 2/s (cST) |
Pressure Range | 7 - 12 bar |
Temperature Range | -10 to + 70°C |
Coil Voltage | 53v (+0.5-2) 50/60 Hz |
This Pump Replaces Riello Pumps with Part No. 3007811 & 3020475
Datasheets |
---|