You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
PA46 Intermittent Blowdown Valve Flanged DN40 PN40 C/W Lever
Gestra PA46 Intermittent Blowdown Valve Flanged DN40 PN40 C/W Lever
The Gestra PA46 is designed for the manual or automatic discharge of boiler blowdown water with non-metallic solids from steam boilers.
Type PA 46 valves are intended for manual operation. For the blowdown process, the valve is opened fully by hand with the lever for around two to three seconds. The plug, which is compressed by a spring, is pushed out of the seat bushing. The sludge is discharged through the open valve. Slowly releasing the lever causes spring force to push the plug into the seat bushing (rapid closing). The valve is closed.
The position of the valve is indicated by the control pin. When the valve is open, the control pin is in its uppermost position; when closed, in its bottom position.
Gestra PA46 Intermittent Blowdown Valve Flanged DN40 PN40 C/W Lever
The Gestra PA46 is designed for the manual or automatic discharge of boiler blowdown water with non-metallic solids from steam boilers.
Type PA 46 valves are intended for manual operation. For the blowdown process, the valve is opened fully by hand with the lever for around two to three seconds. The plug, which is compressed by a spring, is pushed out of the seat bushing. The sludge is discharged through the open valve. Slowly releasing the lever causes spring force to push the plug into the seat bushing (rapid closing). The valve is closed.
The position of the valve is indicated by the control pin. When the valve is open, the control pin is in its uppermost position; when closed, in its bottom position.
| Datasheets |
|---|
