01489 570737

rusty-door-hdr-edit_1.jpg
lrr-500t.jpg
91ftloii6fl._ac_sl1500_.jpg
91ak7psdfhl._ac_sl1500_.jpg
81j2gbxlmgl._ac_sl1500_.jpg
81aovcx4x5l._ac_sl1500_.jpg
hqdefault_18_31.jpg
rusty-door-hdr_1.jpg

Original Rust Remover Liquid Trigger Spray 500g

Excl. VAT: £26.70
Incl. VAT: £32.04
Product Code: JEN-LRR-500T
Quantity:

HOW TO USE

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

APPLY DIRECTLY TO RUST
Shake the bottle well, open the trigger spray to your desired formation and spray directly onto the rusted area. To ensure a full coverage, work well into any pitted areas, corners and edges using a brush. Ensure that exposed corners and edges are well-treated to avoid rust creep beneath. Keep Jenolite active by working in with a brush every 5 minutes and adding more if required. Do not allow the surface to dry out or become tacky. Vertical surfaces may require the most attention. Continue this process until all visible rust has turned dark grey in colour, at which point, wipe the surface dry with a clean, lint-free cloth. To ensure all rust has been successfully removed, brush away the dark grey residue with a wire brush/steel wool (if rust is still present thereafter, repeat the process as above until all rust has been removed).

READY TO PRIME IN 30 MINUTES
After wiping dry, wait for 30 minutes, then apply Jenolite Primer or topcoat. For best results, prime same day. Always check product compatibility. If in doubt test a small area first.

Original Rust Remover Liquid Trigger Spray
500g

  • Features
  • No need to rinse off, just wipe away with surface ready to prime in just 30 minutes
  • This rust killer is excellent for treating boat & yacht keels, caravan sub frames and garden gates
  • Can be used to remove the light oxide films that are produced after shot blasting or grit blasting
  • Easy Spray application works well for tight recessed areas, box sections and tubular components
  • Removes Rust back to bare metal

Perfect for removing rust from almost any metal object. This tried and trusted product is the ideal solution for dealing with the difficult problem of rust on any iron or steel-based metal. You can even use it to remove the light oxide film created by shot blasting, ensuring a smooth, clean finish ready for priming and painting.

Simply spray on the liquid to give a complete coverage across the rusted surface. Once applied allow the liquid to soak into the rust whilst working in with a wire brush or wire brush drill attachment. To keep the reaction active do not allow the surface to dry and reapply the product as necessary. This rust killer is excellent for treating boat & yacht keels, caravan subframes and garden gates. The thick liquid rust remover works well for threaded surfaces which cannot be immersed.

The Rust Remover however is a much more aggressive product, which strips the rust completely, leaving a bare metal surface behind. This can then be primed & top coated and is the most effective way of stopping the return of rust.

Datasheets

Follow us

Our Brands