01489 570737

ges-nrg26-21_7.jpg
ges-nrg26-21-2_7.jpg

NRG26-21Level Probe 400mm

Excl. VAT: £2,337.40
Incl. VAT: £2,804.88
Brand: Gestra
Product Code: GES-NRG26-21-400
Quantity:

Gestra NRG26-21Level Probe 400mm
The NRG 26-21 level electrode continuously monitors levels in steam boilers and (pressurized) hot-water installations or in condensate and feedwater tanks. In conjunction with the level switch NRS 2-.. and the level controller NRR 2-.., this electrode can be used as a water level controller with MIN/MAX alarm.

Designed for use in conjunction with the following level switches/controllers: NRS 2-50, NRS 2-51, NRR 2-50, NRR 2-51, NRR 2-52 and NRR 2-53 or NRS 2-1, NRR 2-1, NRR 2-2 and NRT 2-1.
This electrode is for use in both electrically conductive and non-conductive fluids.

The level electrode and the electronic module NRV 2-29 work according to the capacitance measurement principle and translate the level changes into a level-dependent current signal, with the length of the electrode rod determining the measuring range.

The level electrode is for installation inside steam boilers, vessels or an external level pot; if installed inside the Boiler or Vessel, a protection tube on the side ensures correct functioning.
It is possible to install alongside one Gestra level electrode for water level limiting or high-level alarms in a single protection tube or an external level pot.

Gestra NRG26-21Level Probe 400mm
The NRG 26-21 level electrode continuously monitors levels in steam boilers and (pressurized) hot-water installations or in condensate and feedwater tanks. In conjunction with the level switch NRS 2-.. and the level controller NRR 2-.., this electrode can be used as a water level controller with MIN/MAX alarm.

Designed for use in conjunction with the following level switches/controllers: NRS 2-50, NRS 2-51, NRR 2-50, NRR 2-51, NRR 2-52 and NRR 2-53 or NRS 2-1, NRR 2-1, NRR 2-2 and NRT 2-1.
This electrode is for use in both electrically conductive and non-conductive fluids.

The level electrode and the electronic module NRV 2-29 work according to the capacitance measurement principle and translate the level changes into a level-dependent current signal, with the length of the electrode rod determining the measuring range.

The level electrode is for installation inside steam boilers, vessels or an external level pot; if installed inside the Boiler or Vessel, a protection tube on the side ensures correct functioning.
It is possible to install alongside one Gestra level electrode for water level limiting or high-level alarms in a single protection tube or an external level pot.

Datasheets

Follow us

Our Brands