Gestra MPA46 & MPA47 Operating Lever Kit DN20-DN50

Mounting the Lever The lever of type PA 46 and PA 47 equipment is supplied loose. Mount the lever before installing the equipment.

The lever or emergency lever is intended to be mounted on the right of the equipment in the direction of flow.

• Fit the lever as follows: (please see diagram for the numbers stated)
• Remove the retainer of the folding spring bolt (26) from the clevis (7).
• Pull the folding spring bolt out of the clevis.
• Push the lever (1) into the clevis through the hole in the spacer tube (3).
• Push the folding spring bolt through the holes in the lever and the clevis.
• Press the retainer of the folding spring bolt onto the clevis.

Please Note : For full fitting instructions please see the attached Data Sheet