LME21.330C2 Control Box 240v
Siemens LME21.330C2 Control Box
240v
Burner controls for the supervision of 1 or 2-stage gas or gas/oil burners of small to medium capacity, with or without fan in intermittent operation.
LME… are used for the startup and supervision of 1 or 2-stage gas or gas/oil burners in intermittent operation. The flame is supervised by an ionization probe or flame detector QRA… with ancillary unit AGQ3…A27 for gas/oil forced draft burners or blueburning flames with blue-flame detectors QRC...
In terms of housing dimensions, the LME... are identical with the burner control LGB… and LMG… burner controls (refer to Type summary).
- For gas burners with or without fan to EN 298: 2003
- For gas forced draft burners to EN 676
- For oil burners to EN 230: 2005-10
- Features Undervoltage detection
- Air pressure supervision with functional check of the air pressure switch during startup and operation
- Electrical remote reset facility
- Multicolor indication of fault status and operational status messages
- Limitation of the number of repetitions
- Accurate control sequence thanks to digital signal handling
- Controlled intermittent operation after 24 hours of continuous operation
Siemens LME21.330C2 Control Box
240v
Burner controls for the supervision of 1 or 2-stage gas or gas/oil burners of small to medium capacity, with or without fan in intermittent operation.
LME… are used for the startup and supervision of 1 or 2-stage gas or gas/oil burners in intermittent operation. The flame is supervised by an ionization probe or flame detector QRA… with ancillary unit AGQ3…A27 for gas/oil forced draft burners or blueburning flames with blue-flame detectors QRC...
In terms of housing dimensions, the LME... are identical with the burner control LGB… and LMG… burner controls (refer to Type summary).
- For gas burners with or without fan to EN 298: 2003
- For gas forced draft burners to EN 676
- For oil burners to EN 230: 2005-10
- Features Undervoltage detection
- Air pressure supervision with functional check of the air pressure switch during startup and operation
- Electrical remote reset facility
- Multicolor indication of fault status and operational status messages
- Limitation of the number of repetitions
- Accurate control sequence thanks to digital signal handling
- Controlled intermittent operation after 24 hours of continuous operation
Datasheets |
---|