01489 570737

rego02.jpg
rego02a.jpg

Kolor Kut Fuel / Oil Finding Paste 62g Tub

Excl. VAT: £11.76
Incl. VAT: £14.11
Brand: Regin
Product Code: REGO02
Quantity:

Directions for Use
Place a thin film of Kolor Fuel / Oil Finding Paste on your clean Dipping Tape (or other detection utensil) up to approximately where the water level is expected to appear.

Lower the Dipping Tape into the tank until the bottom is reached. The level will appear by a positive contrast of colours (Changing from Light Pink to Red).

The colour change will occur in Gasoline, Diesel, Naphtha, Kerosene, Gas Oil, Crude Oil, Jet Fuels and other hydrocarbons

Kolor Kut
Fuel / Oil Finding Paste
62g Tub

  • Features
  • Easily test for diesel, petrol, kerosene, crude oil & jet fuels.
  • Pink paste turns bright red after contact with fuel, indicating the level in the tank.
  • Paste is made entirely of non-hazardous materials and cleans off easily after use.

Kolor Kut Fuel / Oil Finding Paste is light pink in colour and turns red upon contact with Gasoline, Diesel, Naphtha, Kerosene, Gas Oil, Crude Oil, Jet Fuels and other hydrocarbons. A most effective product level indicator.

Applied to a Dipping Tape and lowered to the bottom of a Gasoline tank, the paste changes colour where it comes into contact with Gasoline / Petrol, giving you a visual indication as to the depth of the Gasoline.

Kolor Kut gasoline gauging paste is the only gasoline paste approved by the US Military. It is designed for gauging levels of hydrocarbons. It should always be applied "sparingly" direct onto a dip stick or dipping tape at about the point where the level is expected. As a contact product it would usually instantaneously change from pink to red on contact with hydrocarbons. Heavy oils require a few seconds of contact. It is a one off action paste and repeat dips will require a fresh application of paste. Low levels of paste are miscible with hydrocarbons.The paste is not designed to be disturbed and should not be used in a sample. It would be best practice that any tank/vessel being sampled for analysis be sampled first. Analytical results are only as accurate as the sample itself. Gauging of the tanks with paste used sparingly should be the secondary operation.

Datasheets

Follow us

Our Brands