KLC10 Photocell c/w Holder
KLC10 Photocell complete with Holder
The KLC 10 is a UV flame detector for use with Oil, Gas and Dual Fuel burners for intermittent burner operations.
A compact UV Flame Detector developed for Single Flame Combustion that produces little light or radiation in the visible spectrum and has very low flame modulation/flicker frequency. It's innovative design ensures that the detector doesn't react to any form of background radiation from hot refractory or from any other infra-red light sources.
Equipped with an optical interface that visibly indicates the flame signal intensity. The KLC 10 can be connected directly to the ionisation or LDR input of the control box. It's compatible in all its physical dimensions and connection capability to other KLC Flame Detectors.
Meets European Standards EN298:21012-11 for Burner Management Control Units
Technical Information
Input: | AC 230V ~ (-15/+10%) Frequency 50 - 60Hz Consumption 5, 5 mA |
---|---|
FET-Output: | Switch On delay after Flame On typically 0, 5 secSwitch Off time after flame off <0, 5 secMax. switched current 15mAMax. switched power 0.3 WMax. switched voltage 280V AC / 400V DC |
Optical Features: | Spectral range 185 - 260mmAcceptable loss of flame signal ca. 200ms |
Adjustment: | Radial, left |
Lifetime of the UV-Tube: | >10.000h |
Operating Temperature: | -20°C to +60°C (Temperatures >50°C reduces the lifetime of the UV-Tube) |
Humidity: | Max. 95% no condensation permitted |
Operating Position: | Any Position |
Kind of Protection: | IP 41 |
Protection Class: | II |
Protection Against Electric shock: | DIN/EN 60730-2-5 |
Weight: | 0,028 |
Length of Connection Cable: | 1m |
Certification: | CE-0085BS0448 |
KLC10 Photocell complete with Holder
The KLC 10 is a UV flame detector for use with Oil, Gas and Dual Fuel burners for intermittent burner operations.
A compact UV Flame Detector developed for Single Flame Combustion that produces little light or radiation in the visible spectrum and has very low flame modulation/flicker frequency. It's innovative design ensures that the detector doesn't react to any form of background radiation from hot refractory or from any other infra-red light sources.
Equipped with an optical interface that visibly indicates the flame signal intensity. The KLC 10 can be connected directly to the ionisation or LDR input of the control box. It's compatible in all its physical dimensions and connection capability to other KLC Flame Detectors.
Meets European Standards EN298:21012-11 for Burner Management Control Units
Technical Information
Input: | AC 230V ~ (-15/+10%) Frequency 50 - 60Hz Consumption 5, 5 mA |
---|---|
FET-Output: | Switch On delay after Flame On typically 0, 5 secSwitch Off time after flame off <0, 5 secMax. switched current 15mAMax. switched power 0.3 WMax. switched voltage 280V AC / 400V DC |
Optical Features: | Spectral range 185 - 260mmAcceptable loss of flame signal ca. 200ms |
Adjustment: | Radial, left |
Lifetime of the UV-Tube: | >10.000h |
Operating Temperature: | -20°C to +60°C (Temperatures >50°C reduces the lifetime of the UV-Tube) |
Humidity: | Max. 95% no condensation permitted |
Operating Position: | Any Position |
Kind of Protection: | IP 41 |
Protection Class: | II |
Protection Against Electric shock: | DIN/EN 60730-2-5 |
Weight: | 0,028 |
Length of Connection Cable: | 1m |
Certification: | CE-0085BS0448 |
Datasheets |
---|