01489 570737

sat01-214toc.jpg
sat01-214.jpg
sat01-214h-2_1.jpg
sat01-214l-3_1.jpg

IRD1010 16502 Photocell End View C/W 1.8m Lead & Holder

Excl. VAT: £276.29
Incl. VAT: £331.55
Brand: Satronic
Product Code: SAT01-211
Quantity:

Technical infomation

Supply Voltage 220 / 240 V (-15... +10%)
50 Hz (50 - 60 Hz)
Nominal Current Input approx. 4 mA
Power Consumption 1 VA
Ambient Temperature -20°C to +60°C
Insulation Standard IP 41
Mounting Attitude Any
Weight 40g
Flame viewing attitude side-on or end-on according to type
Spectral response 800 - 1100 nm
(with daylight filter) maximum 950 nm
Frequency range 15 Hz.... 250 Hz (-12 dB)
Sensitivity adjustment range approx. 1 : 20 (26 dB)
Switch-on delay (after connecting operating voltage) < 3.5 sec.
Response time < 0.1 sec.
Cut-out time < 1 sec.

IRD1010 16502 Photocell End View C/W 1.8m Lead & Holder
Infra-Red Flicker Detector
Flame monitoring device for yellow or blue burning oil flames

  • Kit Contents
  • Satronic IRD 1010 Flicker Detector Photocell end on
  • 1.8m Lead to suit
  • Holder to suit IRD 1010 Photocell

The IRD 1010 is employed to monitor the flame of an oil burner. This flame monitoring device should be connected to a Satronic oil burner control box. Monitoring is based on the infra-red flicker principle, in other words, the flickering infra-red light of the flame is detected. The steady radiation from, for example, the glowing refractory layer on the inside of the boiler, has no effect on the detector.

The IRD 1010 replaces the models IRD 910, 911 and 911 vi. If exchanging the units, care must be taken to connect them correctly.

Datasheets

Follow us

Our Brands