You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
Hylomar Blue Universal Jointing Gasket Compound 350G
Typical Physical Properties
Hylomar Blue Universal: Medium Grade
| Temperature range | -50°C to +250°C (-58°F to 482°F) |
| Film Thickness | 0.03 mm |
| Typical Surface Finish | 3.0 μm Ra |
| Area covered by 100g | 1.275m² |
| Product coverage after drying | 4mg/cm² |
Instructions for use
Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or both surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited assembly time allows precise alignment of joints to be made. Due to the nature of the compound, fasteners may be required to be re-tightened to the correct torque.
Hylomar Universal Blue (350g) is a medium grade non-setting gasket jointing compound and can be used to replace a traditional gasket or to "dress" it to significantly improve the performance of the gasket.
The compound comes in an easy to apply squeezable tube ensuring that the compound goes where you need it to.
- Features
- Medium Grade
- Non–hardening and non–setting
- Non–flammable
- Unlimited assembly time
- Wide operating temperature ( -50°C to +250°C)
- Allows metal to metal contact
- The non-setting feature allows easy dismantling of components for service and repair work
- Use as an non-curing thread sealant
- Resists vibration
- Typical Applications
- Inlet manifolds
- Timing case covers
- Gearbox and transmission components
- Thread sealing
- Water and oil pumps
- Instrument inspection covers
- Cylinder heads
- Flat rigid sumps
- Most machined surfaces
- Gas turbines
- Water cooled generators
- Turbo vacuum systems
| Datasheets |
|---|
