Heldite H2OK Jointing Compound for Potable Water WRAS Hot & Cold 250ml
Heldite H2OK Jointing Compound for Potable Water WRAS Hot & Cold
Heldite H2OK is a silicone-based jointing compound that does not support microbiological growth and is compatible with most metals, plastics and rubber.
Designed to seal bolted, flanged or screwed pipe joints to prevent leakage in most engineering situations and plumbing systems delivering hot and cold potable water and low pressure steam; Such as Taps, Valves,Plumbing Pipes and fittings. compatible with most metals, plastics and rubber.
Non-toxic and environmentally friendly that meets the requirements of the Water Regulations Advisory Scheme (WRAS).
Tests of effect on Water Quality, BS 6920:2014: Parts 1 – 3 / hot (up to 85 centigrade) and cold water.
- Water Resistant
- Prevents leakages
- WRAS approved
Method of Application
All joints must be clean, dry and free from any cleaning agents or loose material prior to application. Using a putty knife, apply a coat of heldite H20K to each face and allow to become tacky (Extra layers can bebuilt up). Close the joint.
For screwed joints, apply one coat to each mating thread and screw up immediately.
This 250ml tin will cover approximately 4 sq.m.