View Catalogue  
Request Catalogue  

Rubber Insertion Jointing

Rubber Insertion Gasket Jointing a Neoprene (polychloroprene) general purpose rubber with nylon reinforcement. For use with air water and dilute acids providing a leak proof joint to prevent vacuum resulting to air, water and steam pressure.

Rubber Insertion Jointing is recommended for when extrusion could be a problem such as on heavy flanges with a high bolt load of fluctuating temperatures and pressure conditions.

Consisting of a soft grade neoprene rubber with a high quality nylon insertion while also giving a good resistance to ultra violet radiation. Featuring a synthetic rubber with a synthetic polyester scrim for added strength and durability.

Rubber Insertion Jointing is used extensively on calorifiers as a leak proof jointing device between flanges, for water pressure when it is used with a furnace balloon or process system.

  • Typical Applications
  • Low Pressure Systems < 10 Bar
  • Plastic and GRP flanges
  • Water Service
  • Applications of limited bolt load
  • Automotive and aerospace duties
  • Typical Properties
  • Polymer : CR
  • Hardness : 65° Shore A
  • Specific Gravity : 1.55g/cm
  • Operating Temp : -20 to 100°C

 

 

5 Products

1.5mm Black Rubber Insertion Jointing 1.4m x 1m

Excl. VAT: £12.31

Incl. VAT: £14.77

2mm Black Rubber Insertion Jointing 1.4m x 1m

Excl. VAT: £18.12

Incl. VAT: £21.74

3mm Black Rubber Insertion Jointing 1.4m x 1m

Excl. VAT: £25.36

Incl. VAT: £30.43

5mm Black Rubber Insertion Jointing 1.4m x 1m

Excl. VAT: £41.28

Incl. VAT: £49.54

6mm Black Rubber Insertion Jointing 1.4m x 1m

Excl. VAT: £47.07

Incl. VAT: £56.48

Follow Us