You have no items in your shopping cart.
Flame Amplifier, UV, FFRT: 0.8,1.0sec
P.O.A | |
Brand: | Honeywell |
Product Code: | HOR7849A1015 |
Contact Us |
Flame Amplifier, UV, FFRT: 0.8,1.0sec
Honeywell Ultraviolet Flame Amplifier (FFRT: 0.8, 1.0sec) is a solid state plug in that responds to flame detector input indicating flame presence when used with a relay module
- Features
- Flame failure response time of 0.8 or 3.0 seconds.
- Flame signal strength ranges from 0.0 to 5.0 Vdc.
- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
- Flame signal test jacks to measure amplifier flame signal voltage.
- Colour-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame
- detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
- Compatible with existing Honeywell flame detectors (order separately).
- Product Specifications
- Color : Purple
- Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
- Approvals, Canadian Standards Association : Certified: File No. LR95329-3
- Flame Failure Response Time (sec) : 0.8 sec or 1.0 sec
- Approvals, Swiss RE : Acceptable
- Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
- Self Checking : None (standard)
- Use With Primary Safety Control : 7800 SERIES Relay Modules
- Use With Flame Sensor : Gas, Oil: Minipeeper C7027A, C7035A, C7044
Flame Amplifier, UV, FFRT: 0.8,1.0sec
Honeywell Ultraviolet Flame Amplifier (FFRT: 0.8, 1.0sec) is a solid state plug in that responds to flame detector input indicating flame presence when used with a relay module
- Features
- Flame failure response time of 0.8 or 3.0 seconds.
- Flame signal strength ranges from 0.0 to 5.0 Vdc.
- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
- Flame signal test jacks to measure amplifier flame signal voltage.
- Colour-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame
- detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
- Compatible with existing Honeywell flame detectors (order separately).
- Product Specifications
- Color : Purple
- Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
- Approvals, Canadian Standards Association : Certified: File No. LR95329-3
- Flame Failure Response Time (sec) : 0.8 sec or 1.0 sec
- Approvals, Swiss RE : Acceptable
- Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
- Self Checking : None (standard)
- Use With Primary Safety Control : 7800 SERIES Relay Modules
- Use With Flame Sensor : Gas, Oil: Minipeeper C7027A, C7035A, C7044
Datasheets |
---|