ExStik II 4in1 Conductivity/TDS/Salinity Meter
Order Conductivity standards separately
Specifications | Ranges | Max. Resolution | Basic Accuracy |
---|---|---|---|
Conductivity |
0 to 199.9μS/cm 200 to 1999μS/cm 2.00 to 19.99mS/cm |
0.1μS/cm 1μS/cm 0.01mS/cm |
±2% FS |
TDS |
0 to 99.9ppm (mg/L) 100 to 999ppm (mg/L) 1.00 to 0.99ppt (g/L) |
0.1ppm (mg/L) 1ppm (mg/L) 0.01ppt (g/L) |
±2% FS |
Salinity |
0 to 99.9ppm (mg/L) 100 to 999ppm (mg/L) 1.00 to 9.99ppt (g/L) |
0.1ppm (mg/L) 1ppm (mg/L) 0.01ppt (g/L) |
±2% FS |
Temperature | 32° to 149°F (0 to 65°C) | 0.1°F/°C | ±1.8°F/1°C |
Power | Four CR2032 button batteries | ||
Dimensions |
1.4 x 6.8 x1.6" (36 x 173 x 41mm) |
||
Weight | 3.8oz (110g) |
ExStik II 4in1 Conductivity/TDS/Salinity Meter
Exstik II Meter is a waterproof meter featuring one high accuracy multi range sensor designed to measure four parameters. Conductivity, TDS, Salinity and Temperature.
- Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS or Salinity measurements
- Units of measure include μS/cm, mS/cm, ppm, ppt, mg/L, and g/L
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value
- Large 3-1⁄2 digit (2000 count) Digital display with analogue bar-graph to indicate sample trends
- Data Hold, Auto Power Off and low battery indication
- Automatic Temperature Compensation of 2% per °C
- Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
- Internal memory stores up to 25 labelled readings for easy recall
- Self calibration of electronics on power up
- Easy to replace Conductivity cell module
- Waterproof design to withstand wet environment – meets IP57 standard
- EC400 includes meter and Conductivity cell*, protective sensor cap, EC410 Kit sample cup with cap, four CR2032 button batteries, and 48"(1.2m) neckstrap.
Datasheets |
---|