K383 Anti-Seize Grease from Morris Lubricants is a high quality lead free compound that leaves a fine film of copper particles even when temp. flashed or excessively compressed.

Manufactured from high quality mineral oils, non soap thickener and also incorporating copper powder and graphite. This grease works through excessive temperature where the oily component of the compound is flashed off; Or when excessive compression causes most of the grease to be squeezed out as a fine film of copper particles will always remain in any joints of threading helping to prevent seizure.

• Features
• Prevents seizure and galling during assembly and therefore reduces assembly time.
• Enables the easy dismantling of components subjected to high temperatures.
• Provides an effect anti-seize in saturated conditions, including chemical environments and salt water.
• Enables fast and easy dismantling of components, allowing them to be reused after dismantling.

Applications
The excellent anti seize properties of K383 make it ideal for lubricating brake linkages. The product is also recommended as a thread lubricant on studs, pipes, casings and whenever eventual disassembly must proceed smoothly. K383 can be used with confidence on the threads of pipes that carry very hot and corrosive liquids or gases, where it assists sealing and allows trouble free disassembly, including pipe fitting and valves in the chemical, petrochemical, gas and drilling industries. Apply sparingly by brush to the threaded components prior to assembly. For optimum performance, ensure that both the threaded surfaces are completely coated with K383.

As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.

Performance Level
DIN 51502 K1/2R-30
ISO 6743-9 L-XCGIA1/2