Clearflow CF90 Quantum2 Power Flushing Pump Starter Kit 230v
Application | Domestic and small commercial heating systems |
---|---|
Flushing Capability | 40 radiators max; 3 storeys |
Tank Capacity | 57l translucent HDPE |
Electric Motor Size | 1.1 kW, IP55 rating, 230V |
Max. Flow Rate | <150 l/m |
Max. Head | 24m |
Max. Temperature | 75°C |
Flow Reverser Type | instantaneous |
Control Valves | 3-port combination valves for isolation and dumping |
Flow and Return Hoses | 2 x 5m hoses, 19 mm I.D. |
Hose End Fittings | 3/4” BSP x 19mm brass hose couplings |
Dump Hoses | 1 x 8m, 19mm I.D. |
Water Inlet Hose | 1 x 8m |
Overflow Hose | 1 x 3m, 19mm I.D. |
Other Hoses Supplied | 2 x adapter hoses for connection to 1.5” circulator pump fittings. |
Carrying / Transport | Integral handle; 200 mm wheels. |
Weight (Without Hoses) | 22.5 kg |
Chemical Handling Ability | All commercially available acids, alkaline solutions, chlorine solutions. |
Dimensions | 390 x 590 x 890 |
Also included is a starter pack of flushing chemicals, inhibitor and pH test strips, sufficient for 2+ power flushing jobs. A 10 part set of BSP adaptors, comprehensive operations manual and a waterproof plastic hose set carry container.
What's in the kit?
- Hoses and fittings ready assembled
- Flow and return hose: 2 x 5 metre
- Dump hose: 1 x 8 metre
- Water inlet hose: 1 x 8 metre
- Overflow hose: 1 x 3 metre
- Circulator pump adaptor hoses x 2
- Starter pack of chemicals for 2+ jobs
- Power Flush FX2: 2 x 2.5 litres
- Systemsafe-DM corrosion inhibitor: 2 x 1 litre
- Neutralising Crystals: 2 x one shot tubes
- Hyper-Flush non-acidic cleaner: 1 x 1 litre
- pH paper (5 metre roll)
- Instruction manual
- Hose carry container
For Product information please see the individual product pages
CF90 Quantum2
The Ultimate Power Flushing Pump
The all important flow rate of the original Quantum has been increased by a further 10%, without increasing maximum pressure beyond 1.8 bar, to ensure that no damage will be done to a heating system. The flow rate is more than double that of most power flushing pumps on the market, enabling it to remove more debris from a system in less time.
The Quantum2 has a direct drive system to give run-dry capability, whilst the tank capacity has been increased to 57 litres, with virtually no increase in footprint, for ease of location on site and in engineers’ vans. The unit is highly manoeuvrable, with an extended handle and 200mm wheels enabling it to be wheeled up kerbs and stairs.
Performance is similar to commercial power flushing pumps and, although it can be used on systems with three storeys and 35-40 radiators, it may also be used on very small micro-bore heating systems with great effect.
High temperature capability to 75°C is an important feature of the pump, as the efficiency of most flushing chemicals is enhanced with increased temperature. The Quantum2 can be used with dispersant chemicals that need higher temperatures to perform, as well as more powerful ‘one shot’ flushing chemicals, added through the large diameter filler cap.
Sludge and corrosion deposits are dislodged by high velocity water, the direction of which can be reversed instantaneously to create turbulence in radiators. Fresh water is then driven through the system to purge the debris to waste. Progress can be clearly seen at all times through the translucent tank and clear hoses.
- Features
- Higher flow rate and larger tank capacity than the original CF90 Quantum.
- Cleans systems up to 40 radiators (3 storeys).
- Integral tank handle for greater toughness. Protects from impact damage and won't corrode.
- Larger diameter filler cap for easier addition of chemicals.
- Three-port valves for easier dumping operation.
- Improved tank shape gives greater stability, particularly when in a vehicle.
- Tank has hand-holds front and back for ease of handling
- Large diameter 200mm stair wheels to make it easy to move, even when full of water.
- Higher temperature capability.
- Acid-proof: descales combination boilers, water heaters and other equipment.
FLUSHING CAPABILITY: | 40 radiators max; 3 storeys |
---|---|
TANK: | 57L capacity, translucent HDPE |
ELECTRIC MOTOR SIZE: | 0.75 HP, IP54 rating, 230V or 110V |
MAX. FLOW RATE: | 150+ L/min |
MAX.HEAD: | 24mt |
MAX TEMP: | 75°C |
FLOW REVERSER TYPE: | Instantaneous |
CONTROL VALVES: | 2 x 3-port combination valves for isolation and dumping |
FLOW AND RETURN HOSES: | 2 x 5m hoses, 19mm I.D. re-inforced PVC |
HOSE END FITTINGS: | ¾" x 19mm tool-free brass hose couplings |
DUMP HOSE: | 1 x 8m, 19mm I.D. re-inforced PVC |
WATER INLET HOSE: | 1 x 8m ultra tough water hose pipe |
OVERFLOW HOSE: | 1 x 3m, 19m I.D. re-inforced PVC |
OTHER HOSES SUPPLIED: | 2 x adaptor hoses for connection to 1.5" circulator pump fittings. |
CARRYING/TRANSPORT: | Integral handle, large dia. 200mm wheels. |
WEIGHT (WITHOUT HOSES): | 22.5 Kg |
CHEMICAL HANDLING: | All commercially available acids, Alkaline Solutions, Chlorine Solutions |
Datasheets |
---|