Fireye Photocells

View products
Industrial Boilerhouse Supplies Ltd are pleased to be able to supply a range of high quality Fireye Photocells. Available Photocells include 45UV5-1007, 48PT2-9003 and UV1A.

4 Item(s)

Grid  List 

  1. 45UV5-1007 Photocell

    45UV5-1007 Photocell

    Excl. VAT: £1,586.89 Incl. VAT: £1,904.27

    45UV5-1007 Photocell is a self checking ultraviolet scanner for use in applications where there is continuous firing going on yet recycling is infrequent or does not occur.

    This flame scanner checks the electronics and UV tube for the correct operation at intervals of every 4 seconds during the firing period.

    Suitable for fuel gases and oil and features a replaceable UV Tube and (4-314-1) shutter mechanism (61-2914). Mounting 1" NPT or BSP pipe thread with 8ft (2.4m). This unit requites installing with metal shielding over the scanner leads.

    • Features
    • UV Tube
    • 1" BSP Mounting Flange
    • 102VAC to 264VAC
    • Optical range 190 – 270 nm – Solar blind
    • For clean gaseous and oil fuels
    • Limited discrimination capabilities - for single burner applications
    • Self checking with electromagnetical shutter allows continuous operation
    • Used with Fireye controls FlameMonitor, Flameworx, BurnerLogix, D-Series
    • Powered by control
    • Wide temperature range -40 to +93°C
    • Explosion proof housing available ATEX Ex d IIC T6
    Learn More
  2. 48PT2-9003 Photocell

    48PT2-9003 Photocell

    Excl. VAT: £356.81 Incl. VAT: £428.17

    The 48PT2 Infrared Scanner features a low impedance detector specifically engineered to detect the low flicker frequency IR Signals from Gas and Oil flames.

    The Lead Sulfide Infrared Scanner comes complete with cables rated for Tray Cable, Exposed Run (TC-ER) and is fully compliant with the crush and impact requirements of the standard for metal clad cable (UL 1569).

    • Product Contains
    • Infrared Scanner
    • 90° Head
    • BurnerLogix
    • E-Series
    • MicroM
    • Features
    • IR flicker detector
    • Low voltage, typically 7-15VDC across the Cell
    • For gaseous,oil and solid fuels
    • Single burner and Gas Turbine applications
    • Suitable >24hr operation
    • Used with Fireye controls FlameMonitor, Flameworx, BurnerLogix, D-Series
    • Powered by control
    • Temperature range -40 to +60°C
    • Explosion proof housing available ATEX Ex d IIC T6
    Learn More
  3. UV1A Fireye Photocell 3ft Lead

    UV1A Fireye Photocell 3ft Lead

    Excl. VAT: £226.16 Incl. VAT: £271.39

    UV1A Fireye Photocell Flame Scanner is recommended for detecting flames from standard fuel, some waste gas and light oil fuels.

    The UV Scanner can be used to detect flames from heavier oils; but the unburned fuel shroud and/or atomisation shroud can block the passage of the UV from the flame zone to the UV tube which can result in burner and/or burner trips.

    Infrared detection is recommended for fuel oil that is heavier than No. 2 and some installations where waste gases are burned together with natural gas as a main flame.

    • Specifications
    • Operating Voltage : (S1-S2): 560 VAC @ 120V (230V) 50/60 Hz applied
    • Operating Temperature Limits : Maximum: 200°F (94°C)
      Minimum: -40°F (-40°C)
    • Humidity : 85% RH maximum non-condensing
    Learn More
  4. UV1A Fireye Photocell 6ft Lead

    UV1A Fireye Photocell 6ft Lead

    Excl. VAT: £268.99 Incl. VAT: £322.79

    UV1A Fireye Photocell Flame Scanner (6ft) is recommended for detecting flames from standard fuel, some waste gas and light oil fuels.

    The UV Scanner can be used to detect flames from heavier oils; but the unburned fuel shroud and/or atomisation shroud can block the passage of the UV from the flame zone to the UV tube which can result in burner and/or burner trips.

    Infrared detection is recommended for fuel oil that is heavier than No. 2 and some installations where waste gases are burned together with natural gas as a main flame.

    • Specifications
    • Operating Voltage : (S1-S2): 560 VAC @ 120V (230V) 50/60 Hz applied
    • Operating Temperature Limits : Maximum: 200°F (94°C)
      Minimum: -40°F (-40°C)
    • Humidity : 85% RH maximum non-condensing
    Learn More

4 Item(s)

Grid  List