You have no items in your shopping cart.
This Month's Featured Products
Request a Catalogue
Ambirad Pactrol Control Box
- Specifications
- Supply Voltage : 230Vac
- Supply Frequency : 50HZ or 60HZ
- Phase Relationship : Phase – Earth bonded
- Internal Fuse : 2A HRC (20mm) Quick Blow
- Power Consumption : <10VA
- Loads specified as : 230Vac (cosф>=0.6)
- Fan max : 1A
- Pilot valve max : 1A
- Main gas valve max : 1A
- Total maximum load : 2A
- Lockout type : Volatile; Lockout reset response time: <5s;
- HT Open circuit voltage : >15kV minimum @ 30pF load
- Spark Gap : 2.5-4.5mm
- Spark Frequency : 50.00Hz
- Maximum length of HT leads : 1m (Resistive suppression 1k ohm @ HT end of lead recommended)
- Flame detection principle : Flame Ionization rectification
- Electrode configuration : Dual
- Flame sensitivity : 2.0 mA (+/-20%)
- Flame detector response time : Flame on=<1s; Flame off=<1s
- Max. length of detection lead : 1m
- Protection degree : IP20; Ambient temperature range: 0°C to +60°C
- Humidity : 90% max @ 40°C
- Mounting position : Not critical (15mm from HT to adjacent earthed metal)
Ambirad Pactrol Control Box
Ambirad Pactrol Control Box, an Ignition Controller of P16-DIA comes complete with Lead.
Fully proven, full sequence controls designed to meet the needs of appliance manufacturers. Fully approved to EN 298 and meet all the essential requirement of the Gas Appliance Directive Consists of both volatile and non-volatile lockout versions and has an integral spark ignition generator for operation in dual or single electrode applications.
Ideal for use in atmospheric and forced draught appliances, with either single or 2 stage ignition sequences Over the years, it has become an industry standard, with its high impact, flame retardant housing, screw connectors and wide variety of variants
- Typical applications
- Combination Boilers
- Condensing Boilers
- Heating Boilers
- Water Heaters
- Warm Air Heaters
- Radiant Tube Heaters
- Features
- CE Certified to EN298
- Well-proven range of controls
- Integral spark and flame detection
- Single or dual electrode operation
- Volatile or non-volatile lockout functions
- Atmospheric or fanned applications
- Single or 2 stage ignition sequences
- Strong, flame retardant enclosure
- Non-reversible, screw based connector
| Datasheets |
|---|
