Power Punch Set
Drop-forged, high-strength steel power punches ideal for creating ¼" to 1" diameter bolt holes. Unique centering pin ensures absolute punch accuracy. Arch design safely transmits impact force from the punch handle to the cutting head. Exclusive snap-lock, quick-release mechanism allows for quick change of cutting heads. Cutting heads feature finely-honed edges for clean punches. Inside taper effectively clears punched material. Power punch pad provides perfect surface for harder, more accurate hits. Available in 10 piece and 16 piece kits.
Kit Contents Include
DESCRIPTION | AX1860 | AX1861 |
1/4" Power Punch Cutting Head | 1 | 1 |
5/16" Power Punch Cutting Head | 1 | 1 |
3/8" Power Punch Cutting Head | 0 | 1 |
7/16" Power Punch Cutting Head | 0 | 1 |
1/2" Power Punch Cutting Head | 1 | 1 |
9/16" Power Punch Cutting Head | 1 | 1 |
5/8" Power Punch Cutting Head | 1 | 1 |
11/16" Power Punch Cutting Head | 0 | 1 |
3/4" Power Punch Cutting Head | 0 | 1 |
13/16" Power Punch Cutting Head | 1 | 1 |
7/8" Power Punch Cutting Head | 1 | 1 |
15/16" Power Punch Cutting Head | 0 | 1 |
1" Power Punch Cutting Head | 0 | 1 |
Power Punch Centering Pin | 1 | 1 |
Power Punch Handle | 1 | 1 |
31/2" x 71/2" Power Punch Pad | 1 | 1 |
QUICK GUIDE TO PERFECT GASKETS
- Mark center locations of holes to be created.
- Use centering pin to pierce material at each center mark.
- Select desired cutting head.
- Slide sleeve back on handle ad insert cutting head. Release sleeve. Power Punch is ready to use.
- Slide centering pin through handle and into target centre point.
- Hold the Power Punch firmly against material.
- Remove centering pin.
- Strike the Power Punch with hammer until material is cut.