01489 570737

equal-metric_3.jpg
equal-dia_6.jpg

8mm OD Equal Compression Fitting

Excl. VAT: £3.46
Incl. VAT: £4.15
Brand: Crane
Product Code: WADE-MC108
Quantity:

Material Standards For Wade Medium Pressure Brass Compression Fittings
Wade brass compression fittings are designed and manufactured to BS 2051 Part 2 and from material to the following standards;

Bar Parts BS-EN 12164:2011 CW614N Chemical composition % of grade CuZn39Pb3 ( CW614N )

Fe Ni AI Cu Pb Sn Others  
max 0.3 max 0.3 max 0.05 57 - 59 2.5 - 3.5 max 0.3 Total 0.2 Zn-Remainder

Stampings BS-EN 12165:2011 CW617N Chemical composition % of grade CuZn40Pb2 ( CW617N )

Fe Ni AI Cu Pb Sn Others  
max 0.3 max 0.3 max 0.05 57 - 59 1.6 - 2.5 max 0.3 Total 0.2 Zn-Remainder

Copper Compression Rings & Sealing Washers: BS-EN 12449
Although ‘Wade Couplings’ are primarily designed for use with copper tubes the range also includes a variety of compression nuts and rings which provide additional jointing options for;

  • PVC covered Copper tubes
  • Nylon tube
  • Polythene tubes
  • Brass tube
  • Bundy tube

The standard range is available to suit Imperial and Metric outside diameter tube sizes from 1/8” to 1” and 4mm to 28mm. Male and Female stud thread connection options include; BSP Parallel, BSP Taper and API / NPT from 1/8” to 1”.

Note: Wade coupling bodies are designed for use with Wade compression nuts and rings. The component parts are not intended as interchangeable with other brands.

The recommended working pressures for the Wade brass compression fittings range conform to BS 2051 Part 1 for temperatures up to 65° C. The maximum recommended working pressures stated apply for use with Copper and PVC Covered Copper Tubes at ambient temperature.

Note: if other tube types are used these figures do not apply and the maximum working pressure and temperature will be limited by the tubing material, wall thickness and capability.

For additional information please see the Technical Specification Document Linked Below

  • 8mm OD Equal Compression Fitting
    Equal Ended Coupling
  • In-line configuration
  • Enables connection of 2 tubes of the same outside diameter
Tube OD. L Length H1 Hex A/F H2 Hex A/F P Abutment
8 40 13 14 10

Datasheets

Follow us

Our Brands