01489 570737

50-311-50.jpg
50-311-50-detail.jpg

10mm Dia Ceramic Soft Round Rope Lagging 50M Roll

Excl. VAT: £302.84
Incl. VAT: £363.41
Product Code: 50-311-50M
Quantity:

10mm Dia Ceramic Soft Round Rope Lagging 50M Roll
Ceramic rope lagging provides an efficient method for insulating pipework and is also suitable for a variety of high temperature sealing and caulking applications in boilers, furnaces, kilns and joint seals in coke ovens.

Ceramic rope lagging is particularly suitable for forming into insulation “o” rings and seals on industrial and domestic heating appliances.

  • Features
  • Ceramic packing is manufactured from high performance refractory ceramic fibre yarns reinforced with either glass or wire filament to produce a round rope section.
  • Ceramic yarns are produced on traditional textile machinery by carding high purity 1260°C grade ceramic fibres with a percentage of cellulose fibre to assist in processing.
  • The yarns are spun and combined with the relevant re-enforcing media to improve the tensile strength at extended temperatures.
  • The organic content will burn off at temperatures above 200°C without affecting properties of the ceramic fibre, however adequate ventilation should be provided during this initial firing.
  • Where tensile strength is important the temperature limitations of the re-enforcing media should be considered.
  • Suitable for temperatures up to 1260°C dependant on application.
  • Resistant to most chemicals except phosphoric acid, hydrofluoric acid and strong alkalis.
  • Ceramic packing is non-combustible, has low thermal conductivity, and is resistant to thermal shock.
  • The ceramic fibre insulation is rated to 1260°C in situ.

N.B. Packing is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the product is heat cleaned prior to use or if the organic impurities in the product can be allowed to burn off in situ on application for the initial period.

10mm Dia Ceramic Soft Round Rope Lagging 50M Roll
Ceramic rope lagging provides an efficient method for insulating pipework and is also suitable for a variety of high temperature sealing and caulking applications in boilers, furnaces, kilns and joint seals in coke ovens.

Ceramic rope lagging is particularly suitable for forming into insulation “o” rings and seals on industrial and domestic heating appliances.

  • Features
  • Ceramic packing is manufactured from high performance refractory ceramic fibre yarns reinforced with either glass or wire filament to produce a round rope section.
  • Ceramic yarns are produced on traditional textile machinery by carding high purity 1260°C grade ceramic fibres with a percentage of cellulose fibre to assist in processing.
  • The yarns are spun and combined with the relevant re-enforcing media to improve the tensile strength at extended temperatures.
  • The organic content will burn off at temperatures above 200°C without affecting properties of the ceramic fibre, however adequate ventilation should be provided during this initial firing.
  • Where tensile strength is important the temperature limitations of the re-enforcing media should be considered.
  • Suitable for temperatures up to 1260°C dependant on application.
  • Resistant to most chemicals except phosphoric acid, hydrofluoric acid and strong alkalis.
  • Ceramic packing is non-combustible, has low thermal conductivity, and is resistant to thermal shock.
  • The ceramic fibre insulation is rated to 1260°C in situ.

N.B. Packing is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the product is heat cleaned prior to use or if the organic impurities in the product can be allowed to burn off in situ on application for the initial period.

Datasheets

Follow us

Our Brands