Bailey & Mackey Pressure Switches

This series of pressure switches can be used for applications where an electrical circuit is required to close or open at a required pressure.

The robustness of this series of pressure switches enables all applications in all industries to be satisfied.
• Robust and reliable
• Diaphragm operated <42 Bar
• Piston operated >42Bar
• Proven performance
• Wetted parts for use with all fluids
• Fully adjustable
• Easily customised
• Enclosure rating IP65
• CE marked for all directives that apply
• LPCB approved
• UL 508 Certified

To ensure long service life select the pressure range as follows :
• Dynamic pressure applications Pmax = 75% of Range
• Static pressure applications Pmax = 100% of Range
• Maximum pressure that can be applied is 125% of pressure range

10 amp at 250V inductive load
1 amp at 30V DC inductive load

Features:

These pressure switches can be mounted directly on the connecting thread. Sealing groves are machined onto the end face of parallel threads for use with sealing washers. A mounting bracket is available if required.

At ambient pressure the switches will be in the operated condition. Consequently the wiring should be reversed.
ie - NO becomes NC

All connecting threads used in industry are available including British, American and Metric. Please state the connection thread when ordering.

Flanged fittings are available and all types of Hygienic fittings can be supplied assembled directly onto the pressure switch. If flush diaphragms are required please consult our technical department.