Oil Transfer Pump

Compact Oil Transfer Pump Sets are offered for various applications including pressurising the ring main, filling daily service tanks and maintaining oil supplies to high level burner installations.

Each unit is supplied mounted on a drip tray suitable for wall or floor mounting.

The unit as supplied is suitable for a low pressure single pipe installation, however the pump sets can be adapted for use on two-pipe systems. High Pressure Units can be supplied to special order
An adjustable pressure regulator is incorporated in all pumps.

The Pumps are supplied for use on light oil (35 second) and the IBSTP  40, 60, 100, 150 and 250 series are suitable for oil up to 200 seconds.

Pump sets for Heavy Oil and available for special order.

All pump sets are supplied with a filter in the supply line, additional filters may be required on some applications.

The Compact Oil Transfer Pump Sets require additional protection if mounting in an open environment. Switch gear and starters are not supplied.

Pressure reducing valves and back pressure relief valves are also   available if required.

When designing a transfer pump installation the pump set should be selected to deliver approximately 20% above the burner requirements. Whenever possible the oil supply to the transfer pump should be by gravity feed.